NX-230EX/330EX ATEX Analog-Digital Portable Transceiver NEXEDGE VHF/UHF

NX-230EX/330EX
NEXEDGE VHF/UHF Analog-Digital ATEX Portable Transceiver

(SERVED ON REQUEST)

Read more
€1,485.88 (tax incl.)
Last items in stock 1 Item
Reference:
Love0
Add to wishlist
Related products
Description

NX-230EX / 330EX
Portable ATEX Analog-Digital NEXEDGE VHF / UHF Transceiver

NX-230EXE PORTABLE VHF TRANSCEIVER

NX-330EXE PORTABLE UHF TRANSCEIVER

Outstanding Features

NXDN Digital Air Interface with AMBE + 2 Vocoder for natural sounding digital voice
It operates in NXDN Digital and FM Analog modes, even on the same channel. Automatic reception mode (digital or analog)
ATEX EU 94/9 / EC certification. Gas Protection - II2G Ex ib IIC T4 Gb. Dust Protection - II2D Ex ib IIIC T110 degrees C Db Mining - IM2 Ex ib I Mb
Incorporates GPS
Conventional Digital and Trunk Digital modes. Trunk Digital Multi-Site, up to 60,000 GIDs and 60,000 UIDs per network
Multi-site IP network supported
Real 6.25KHz channeling
Includes Radio-to-Radio Mode (no repeater required)
IP65 / 67 and MIL-STD 810C / D / E / F / G certified

Supplied accessories

Belt clip Yes
Manual Yes, in Spanish, English, French, German, Italian, Dutch, Greek and Turkish
Fixing screw Yes

General characteristics PMR

5-Tone formats signage ZVEI, ZVEI2, CCIR, EIA, EEA and " KENWOOD " in 5-Tone standard. 2-Stream 5-Tone, 3-Stream 5-Tone plus formats up to 8-Tone
Battery saver mode Yes
Battery status indicator Yes
Busy channel lock Yes
Caller Alert Yes
Compact design Yes
Audio Compressor Yes
Digital ANI Included Yes
Display configuration in any language other than English Yes
Dot Matrix Display Yes
3-digit sub-display Yes
DTMF Yes
Ease of use of operation Yes
Emergency Key Function Yes
Emergency button Yes
Emergency function Motion detection Fallen Man function included. Optional, with additional software license, adds two modes of "personnel security", alarm timer for no movement or pre-alert for excessive movement
Flash memory Yes
FleetSync / FleetSync II Yes
Front panel test function Yes
Built-in GPS Yes
Internal VOX available Yes
Front panel with keyboard Yes, 12 keys. Phone mode keyboard
Lone Worker Function Yes
Low battery warning Yes
Fallen Man Function Yes, both the angle and the activation time can be pre-set
MPT1327 Trunk Yes, In analog FM trunk mode
Multiple Search Functions Yes
Selectable operation tone Yes
Programmable Keys Function 8 Programmable Function Keys
Programmable RX / TX indication Yes, selectable ON or OFF
PTT ID Yes
QT (CTCSS) / DQT (digital) Yes
RSSI Level Indicator Yes
SDM manual input Yes
Single tone encoder, 2 tone encoder Yes
Talk around Yes
"Talk Back" function Yes
Transmission timer Yes
Transceiver Password Yes
Transparent Data Mode Yes
Voice Inversion Encryption Yes
Voting function Yes
Programming and Adjustment by Windows PC Yes
Cable Cloning Function Yes

CHARACTERISTICS PMR NEXEDGE

Alphanumeric aliases 1 Characters
Auto-Location / Registration Trunk Multi-Site Mode Yes
General Call (Trunk Mode) Yes
Priority call queue Yes
CW message function (Morse code) Yes
Degraded mode Yes
Conventional Analog FM included Yes
GIDs per Network (Multi-site Trunk Mode) 60000
GPS location with voice Yes
Group Call (Trunk Mode) Yes
Group Registration (Trunk Mode) Yes
Private Individual Call (Trunk Mode) Yes
Late Entry (Trunk Mode) Yes
Location record Yes
Trunk Mode Messaging Yes
Multi-site IP network supported Yes, up to 48 sites
NXDN Conventional included Yes
Channel Spacing NXDN Digital 12.5 / 6.25kHz Yes
Alias Via-el-aire Yes
Over-the-air programming Yes, it allows NEXEDGE radios to be remotely re-programmed
Priority monitor IDs Yes, 4 IDs
Radio Access Number (RAN) Yes, 64 (including "No") in Conventional Digital Mode
Remote Group Inclusion (Trunk Mode) Yes
Remote lock / unlock / erase Yes
Selective Calling - Individual and Group (Digital Mode) Yes
Short and long data messages Yes
Site Roaming (Conventional Digital Mode) Yes
Special Alert Tones Melodies Yes
Status messages Yes
Telephone interconnection function Yes, it requires KTI-4 unit and telephone interface
Trunk transmission mode Yes
UIDs per Network (Multi-site Trunk Mode) 60000
Wide Coverage for All Group Calls (Multi-site Trunk Mode) Yes

FleetSync Signaling Specifications

State of emergency Yes
GPS confirmation request Yes
Group call Yes
Status messages On / Off Yes
GPS report with PTT ID and Emergency Yes
ANI Digital PTT ID Yes
Selective call Yes
Sending GPS Data Yes
Short text messages Yes
GPS bulk report of status messages Yes
Status messages Yes

Applicable standards

ATEX certifications Yes, EU 94/9 / EC. Certified to II2G Ex ib IIC T4 Gb - Gas Protection, II2D Ex ib IIIC T110 degrees C Db - Dust Protection, IM2 Ex ib I Mb - Mining
EN300 086, 300 113, 300 219, 301 489 Yes
R & TTE: EN300 440 Yes
EN301 166 6.25KHz Digital Voice and Data
EN60065, 60950-1, 60215 Yes
Factory quality certification and location ISO 9001. Manufactured in Japan
For use in the EU Yes
IECEx certification Gas Protection - Ex ib IIC T4 Gb. Dust Protection - Ex ib IIIC T110 degrees C Db Mining - Ex ib I Mb
IP65 Yes
IP67 Yes
Measurement - EIA Standards Yes
Measurement - EN Standards Yes
MIL-STD 810 C / D / E / F / G Yes

Technical specifications

Frequency range 136 - 174 MHz
Number of channels 512
Number of Zones 128
Conversation groups Yes
Channel frequency spread 38 MHz
Channel Spacing - Analog - Wide / Medium / Narrow 25 kHz / 20 kHz / 12.5 kHz
Channel Spacing - Digital - Wide / Narrow 12.5 kHz / 6.25 kHz
Antenna impedance - 50 Ohm Yes
Battery life 5-5-90 approx 8.5 hours GPS ON approx 14 hours GPS OFF
Frequency Tolerance ± 2 ppm (-20 ° C to + 50 ° C)
Operating temperature -20 ° C to + 50 ° C
Operating voltage 7.5 V DC (± 6.2 / 8.4 V)
Dimensions With KNB-70LEX: 138 x 58 x 39.8 mm - Projections not included -
Net weight) With KNB-70LEX: 493 g

Receiver Specifications

Adjacent Channel Selectivity (Analog) 68 dB at 12.5 kHz
Audio output power 500 mW with distortion less than 3%. 8 Ohms Impedance
Intermodulation (Analog) 65 dB
Sensitivity (Analog) - EIA 12 dB SINAD Test
Sensitivity (Analog) - IN 20 dB SINAD 25KHz / 20KHz / 12.5KHz = -3dB microvolt / -3dB microvolt / -1 dB microvolt
Sensitivity (Digital) 12.5KHz / 6.25KHz = 1dB microvolt / -2dB microvolt at 1% BER, 0.32 microvolt / 0.25 microvolt at 3% BER
Spurious response rejection 70 dB

Transmitter Specifications

Radio Frequency Output Power 1.2 W
FM noise (EIA) Analog: 48 dB at 25 kHz 48 dB at 20 kHz 43 dB at 12.5 kHz
Modulation distortion Less than 3%
Modulation limitation Analog - 25KHz / 20KHz / 12.5KHz - ± 5KHz / ± 4KHz / ± 2.5KHz
Spurious emission (EN) -36 dBm ≤ 1 GHz -30 dBm> 1 GHz
Read more
Product Details
Shipping and Returns
Reviews
No comments

Menu

Share

QR code

Settings

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in