Featured Features
Mode 2 repeater dPMR TS102 658 |
Works in dPMR Digital Convetional Voice and Analog FM Mode modes, even on the same channel |
Auto Receive Mode (Digital or Analog) |
Also available by updating the firmware of the current NEXEDGE NXR-810s |
Multi-location mode IP network (via KTI-3 optional) |
Supplied accessories
Pad | Yes |
D.C. cable. | Yes |
Fuse | Yes, 15A |
Handle | Yes |
Instruction manual | Yes, Spanish, English, French, Italian, German, Dutch, Turkish and Greek |
Fixing screw | Yes |
Base Station and Repeater Features
Built-in 16 CTCSS/DCS Repeater Controller | Yes |
Rack Mount Design 19" | Yes |
Audio distortion | Less than 2.5% |
CW identity | Yes |
Flash memory for future updates | Yes |
Front panel speaker | Yes |
Operation Full-Duplex | Yes |
Lock Timer | Yes |
LCD Display and Pilots | Yes |
Front Panel Microphone Connector | Yes |
Programmable Keys Function | 6 |
Repeater functions | Yes |
Transmission timer | Yes |
Front Panel Volume Control | Yes |
Software programming and tuning | Yes |
Features NEXEDGE dPMR
Multi-site Calling Mode | Unicast |
Applicable standards
dPMR: TS 102 658 | Yes, Tier 2 Mode 1 Point-to-Point Tier 2 Mode 2 Repeater |
EN300 086, 300 113, 300 219, 301 489 | Yes |
EN60065, 60950-1, 60215 | Yes |
Measurement - EIA Standards | Yes |
Measurement - EN Standards | Yes |
Technical Specifications
Frequency range | 400 - 470 MHz |
Number of channels | 30 |
Channel frequency dispersion | 70 MHz |
Channel spacing | Analog - 25kHz/20kHz/12.5kHz |
Channel Spacing - Digital | 6.25 kHz |
Antenna Impedance - 50 Ohm | Yes |
Antenna connector | RX: BNC TX: N |
Consumption | Rest: 0.5 A Reception: 1.0 A Transmission: 11.0 A |
Function cycles | 100% to 25 Watts, 50% of maximum power |
Frequency Tolerance | ± 1 ppm (-30oC to +60oC) |
Operating temperature | -30oC to +60oC |
Operating voltage | 13.2 V DC (10.8 x 15.6 V DC) |
PLL increments per Channel | 2.5 kHz/3.125 kHz |
Dimensions | 483 x 88 x 340 mm - Projections not included - |
Weight (net) | 9.7 kg |
Receiver Specifications
Adjacent channel selectivity | Analog: 80 dB at 25 kHz/78 dB at 20 kHz/74 dB at 12.5 kHz |
Audio output power | 4 Watts with distortion less than 5% |
Intermodulation | Analog - 72dB |
Sensitivity | Digital: 3% BER: 0.22 V at 6.25 kHz. 1% BER: -6 dB V at 6.25 kHz. |
Sensitivity - EIA 12 dB SINAD | 0.28 V |
Sensitivity - EN 20 dB SINAD | -3dB V |
Spurea response rejection | 85 dB |
Transmitter specifications
Radio frequency output power | 5 W - 50 W |
FM Noise (EIA) | 55 dB at 25 kHz 53 dB at 20 kHz 50 dB at 12.5 kHz |
Modulation distortion | Less than 1% |
Modulation limitation | Analog - 25KHz/20KHz/12.5KHz - ± 5KHz/± 4KHz/± 2.5KHz |
Spurious Emission (EN) | -36 dBm ≤ 1 GHz -30 dBm > 1 GHz |