NXR-810E dPMR ANALOG/DIGITAL UHF REPEATER
Featured Features
| Mode 2 repeater dPMR TS102 658 |
| Works in dPMR Digital Convetional Voice and Analog FM Mode modes, even on the same channel |
| Auto Receive Mode (Digital or Analog) |
| Also available by updating the firmware of the current NEXEDGE NXR-810s |
| Multi-location mode IP network (via KTI-3 optional) |
Supplied accessories
| Pad | Yes |
| D.C. cable. | Yes |
| Fuse | Yes, 15A |
| Handle | Yes |
| Instruction manual | Yes, Spanish, English, French, Italian, German, Dutch, Turkish and Greek |
| Fixing screw | Yes |
Base Station and Repeater Features
| Built-in 16 CTCSS/DCS Repeater Controller | Yes |
| Rack Mount Design 19" | Yes |
| Audio distortion | Less than 2.5% |
| CW identity | Yes |
| Flash memory for future updates | Yes |
| Front panel speaker | Yes |
| Operation Full-Duplex | Yes |
| Lock Timer | Yes |
| LCD Display and Pilots | Yes |
| Front Panel Microphone Connector | Yes |
| Programmable Keys Function | 6 |
| Repeater functions | Yes |
| Transmission timer | Yes |
| Front Panel Volume Control | Yes |
| Software programming and tuning | Yes |
Features NEXEDGE dPMR
| Multi-site Calling Mode | Unicast |
Applicable standards
| dPMR: TS 102 658 | Yes, Tier 2 Mode 1 Point-to-Point Tier 2 Mode 2 Repeater |
| EN300 086, 300 113, 300 219, 301 489 | Yes |
| EN60065, 60950-1, 60215 | Yes |
| Measurement - EIA Standards | Yes |
| Measurement - EN Standards | Yes |
Technical Specifications
| Frequency range | 400 - 470 MHz |
| Number of channels | 30 |
| Channel frequency dispersion | 70 MHz |
| Channel spacing | Analog - 25kHz/20kHz/12.5kHz |
| Channel Spacing - Digital | 6.25 kHz |
| Antenna Impedance - 50 Ohm | Yes |
| Antenna connector | RX: BNC TX: N |
| Consumption | Rest: 0.5 A Reception: 1.0 A Transmission: 11.0 A |
| Function cycles | 100% to 25 Watts, 50% of maximum power |
| Frequency Tolerance | ± 1 ppm (-30oC to +60oC) |
| Operating temperature | -30oC to +60oC |
| Operating voltage | 13.2 V DC (10.8 x 15.6 V DC) |
| PLL increments per Channel | 2.5 kHz/3.125 kHz |
| Dimensions | 483 x 88 x 340 mm - Projections not included - |
| Weight (net) | 9.7 kg |
Receiver Specifications
| Adjacent channel selectivity | Analog: 80 dB at 25 kHz/78 dB at 20 kHz/74 dB at 12.5 kHz |
| Audio output power | 4 Watts with distortion less than 5% |
| Intermodulation | Analog - 72dB |
| Sensitivity | Digital: 3% BER: 0.22 V at 6.25 kHz. 1% BER: -6 dB V at 6.25 kHz. |
| Sensitivity - EIA 12 dB SINAD | 0.28 V |
| Sensitivity - EN 20 dB SINAD | -3dB V |
| Spurea response rejection | 85 dB |
Transmitter specifications
| Radio frequency output power | 5 W - 50 W |
| FM Noise (EIA) | 55 dB at 25 kHz 53 dB at 20 kHz 50 dB at 12.5 kHz |
| Modulation distortion | Less than 1% |
| Modulation limitation | Analog - 25KHz/20KHz/12.5KHz - ± 5KHz/± 4KHz/± 2.5KHz |
| Spurious Emission (EN) | -36 dBm ≤ 1 GHz -30 dBm > 1 GHz |
English
Español